Arctic Charm – Lagoon 40 Skipper User Guide

Vessel-specific operating guidance, technical information, safety procedures and practical instructions for the skipper and crew of Arctic Charm.

Vessel: Arctic Charm (AC) · Lagoon 40 · Tromsø, Norway

Arctic Charm – Vessel Particulars

Vessel: Arctic Charm
Model: Lagoon 40
Call sign: LH4395
MMSI: 258012150
Design category: B
Recorded operating area: A – verify current approval
Recorded passenger figure: 12 – verify approved total persons onboard
Length: 11.74 m
Beam: 6.76 m
Draft: 1.35 m
Mast height: 18.62 m
Displacement: 10,890 kg
Freshwater capacity: 600 litres
Diesel capacity: 400 litres

Vessel particulars are based on ACIN's recorded information. Verify current certificates, operating limits, maximum persons onboard and actual equipment configuration before departure.

Important – Skipper Responsibility

This guide is a practical vessel reference, not a replacement for the manufacturer's manuals, statutory requirements, the onboard safety plan or the skipper's own professional judgement and pre-departure checks.

The skipper is responsible for verifying the condition of the vessel, equipment, safety systems and operational readiness before departure.

Some technical information originates from ACIN's earlier Lagoon 450F instructions. These details must be verified for Arctic Charm before operational use. Report discrepancies and safety-critical defects to ACIN.

Mandatory Documents & Operational References

The skipper must review the applicable operational and safety documents before departure. The ski guide must also review the documents relevant to their responsibilities.

Operational & Safety Documents

Insurance & Contractual References

The signed charter agreement, vessel documentation, onboard safety procedures and applicable legal requirements take precedence where relevant.

1. Before Boarding, Departure and Official Manuals

Review the charter itinerary, expected weather, planned sailing area, guest and crew details, technical inspection report and all known vessel deviations before departure.

The skipper must complete an independent inspection and confirm that the vessel is suitable for the intended voyage.

Official Lagoon Manuals

The correct Lagoon 40 owner's manual must be available onboard and consulted for vessel-specific equipment, operating procedures and technical limitations.

ACIN's original Lagoon guide provides the following manual reference:

Official Lagoon 450 Manual – Original Reference

Important: This is a Lagoon 450 manual, not a verified Lagoon 40 manual. It must not replace the correct Arctic Charm documentation.

The original guide also refers to a German-language manual stored in a suitcase beneath the captain's position in the saloon. Verify whether an equivalent manual is carried on Arctic Charm.

Conduct a passenger safety briefing covering life jackets, emergency equipment, man-overboard procedures, fire response, evacuation, communications and crew responsibilities.

2. Safety Equipment, Life Jackets and Fire Protection

Locate and inspect all required safety equipment, including life jackets, life raft, first-aid kit, fire extinguishers, fire blankets, distress equipment and emergency communications.

Life jackets: Life jackets must be worn when moving on deck in accordance with the skipper's safety instructions. The skipper is responsible for enforcing this rule.

Check that sufficient correctly sized life jackets are available for everyone onboard.

Fire-Fighting Equipment

ACIN's original Lagoon 450F instructions identify fire extinguishers beneath the captain's table in the saloon, on the cockpit bench and automatic extinguishers in each engine compartment.

Fire blankets are described as being located in each cabin and near the galley.

Arctic Charm – Equipment Locations Must Be Verified

These locations originate from the Lagoon 450F guide. Confirm and document the actual locations of all fire-fighting equipment on Arctic Charm before conducting the passenger safety briefing.

Test each fire alarm before departure using its approved test procedure.

Check accessibility, condition and applicable inspection dates for safety equipment.

Ensure that guests know how to raise the alarm, where to assemble and how to follow the skipper's instructions.

3. Navigation, Paper Charts, Instruments and AIS

Before departure, check chartplotters, compass, depth instruments, navigation lights, autopilot, VHF, AIS and other installed navigation equipment.

Paper Charts and EFS Updates

The skipper must ensure that the vessel carries suitable, up-to-date navigational information and the charts required for the intended sailing area.

ACIN's original Lagoon guide requires paper charts for the planned voyage and checks against Norwegian Notices to Mariners (EFS).

Official chart overview: Norwegian Mapping Authority – Nautical Charts

Notices to Mariners: Kartverket – EFS

The original Lagoon guide lists the following paper chart numbers: 83, 84, 86, 87, 88, 89, 91, 92, 93 and 94.

These are historical reference numbers, not a confirmed chart inventory for Arctic Charm. Verify current chart coverage and corrections.

The original guide also recommends having updated electronic charts available on a separate device, for example Navionics, as an additional navigational reference.

Paper Chart Supplier – Tromsø

Norli Bokhuset
Storgata 86, Tromsø
Telephone: +47 77 68 30 36
Email: bokhuset.tromso@norli.no

Norli – Store Information

Confirm current chart availability and contact details before visiting.

AIS – Important Equipment Note

ACIN's safety equipment information identifies AIS 650 for Arctic Charm. Confirm the actual installed model and its operation.

The original Lagoon 450F guide states that its AIS system only operates when the master screen is set to the saloon.

Verify AIS Configuration on Arctic Charm

Confirm whether Arctic Charm uses the same screen arrangement. Test AIS operation and transmission where applicable. Do not assume that displaying AIS targets proves the vessel is transmitting.

AIS is an aid to navigation and does not replace a proper lookout, radar where fitted, or collision avoidance procedures.

4. Electrical Systems, Fuses, Batteries and Inverter

Familiarise yourself with the vessel's electrical distribution, battery banks, shore-power connections, inverter, circuit breakers, switches and monitoring equipment.

Electrical and Water System Locations

ACIN's original Lagoon 450F guide states:

  • Electrical fuses and switches are located in the starboard aft cabin.
  • Water pumps and valves are located in the port aft cabin.

Arctic Charm: These positions must be verified onboard and corrected if the Lagoon 40 arrangement differs.

Inverter Reset Procedure

The original Lagoon guide describes an inverter reset procedure using the main fuse beneath the bed in the starboard aft cabin.

It warns that this operation also switches off navigation instruments.

The original instructions therefore require a person to remain at the steering position on the flybridge during the reset.

Before assuming that the inverter has failed, the original guide recommends checking whether the microwave oven is operating.

Critical – Do Not Apply an Unverified Reset Procedure

The procedure above belongs to the Lagoon 450F. Arctic Charm's inverter, electrical distribution and affected circuits must be identified before any reset is attempted.

Do not interrupt essential navigation or safety equipment while underway without maintaining safe vessel control, lookout and appropriate alternative navigation capability.

230V Appliances and Electrical Load

The original Lagoon guide describes a 16A shore-power system with an approximate capacity of 3.6 kW.

This rating must be verified for Arctic Charm.

Avoid operating several high-consumption appliances simultaneously.

The original guide specifically warns against operating the microwave oven and coffee machine together on the inverter.

Electric fan heaters should not be used unless the available electrical supply and circuit ratings safely support their operation.

The original guide recommends switching off the inverter before going to bed to prevent accidental battery discharge.

On Arctic Charm, confirm the correct inverter shutdown procedure and ensure that essential safety or monitoring systems remain powered.

5. Diesel Heating, Cabin Fans and Temperature Control

Verify the heating equipment installed on Arctic Charm, including controller locations, fuel supply, ventilation, coolant arrangements where fitted and normal operating procedures.

Original Lagoon Heating Arrangement

ACIN's original Lagoon 450F guide describes two Eberspächer 5 kW diesel heaters using a water-based heating system.

It states that blue coolant reservoirs are located in the engine compartments and that coolant may need topping up approximately every second day.

The original guide also instructs that cabin heating fans should be switched on when the heating system is operating.

The original instructions specify a minimum waiting period of 20 minutes before restarting the Eberspächer heating system after an inverter reset.

The original Lagoon 450F additionally has a 5 kW Webasto cockpit heater and a defroster using hot water from the starboard engine.

Arctic Charm – Heating Configuration Must Be Confirmed

Do not assume that Arctic Charm has the same number of heaters, coolant system, cockpit Webasto or defroster arrangement.

Confirm the coolant requirements and restart intervals against the installed equipment. Never open a hot or pressurised coolant system. Use only the correct approved coolant.

General Heating Operation

  1. Identify the installed heating equipment and correct controller.
  2. Check for visible leaks, alarms and abnormal conditions.
  3. Start the system using the designated controller.
  4. Allow the normal ignition and warm-up sequence to complete.
  5. Confirm normal operation through warm airflow and system indicators.
  6. Set cabin thermostats and fans as required.
  7. Follow the manufacturer's shutdown and restart procedures.
  8. Stop the heater and contact ACIN if abnormal smoke, noise or alarms occur.

Never touch hot exhaust components to test heater operation. Ensure safe exhaust discharge and appropriate carbon monoxide protection.

6. Freshwater System, Pumps and Water Conservation

Arctic Charm has a recorded freshwater capacity of 600 litres.

Before departure, verify water tank levels, pump operation, pressure, valves, visible pipework and relevant bilge compartments.

Explain water conservation to guests, especially during extended voyages without access to freshwater.

Freshwater Pump Overnight

ACIN's original Lagoon 450F guide instructs that the freshwater pump should be switched off overnight because of a known starboard-side leak.

Arctic Charm: This leak has not been confirmed for this vessel. The skipper must verify whether any similar defect or overnight pump restriction applies.

Any leak, unexpected pump cycling or abnormal water consumption must be investigated and recorded.

7. Bilges, Pumps, Alarms and Water Ingress

Locate all bilge inspection points, pump controls, automatic bilge pumps and alarms.

Check for unexpected water accumulation and verify that relevant pumps and alarms operate correctly.

Never assume that water in the bilge is harmless. Investigate freshwater leaks, seawater ingress and other possible sources.

Safety-critical water ingress must be addressed immediately, with appropriate emergency measures and assistance requested when required.

8. Engines, Saildrives and Propulsion

Before departure, inspect both engine compartments for abnormal conditions, visible leaks, loose connections and other defects.

Check relevant fluid levels, cooling-water discharge, engine controls, steering response and propulsion alarms according to the manufacturer's instructions.

Familiarise yourself with the installed saildrives, propellers and their operating limitations.

Do not operate machinery with unresolved critical alarms, overheating, abnormal vibration or suspected damage.

Keep ropes, fishing lines and other loose equipment clear of the propellers.

9. Sailing, Winter Sailing and Lazy Bag

Inspect the rigging, sails, sheets, halyards, winches and associated deck equipment before sailing.

Important – Lazy Bag During Winter Sailing

When using the mainsail in winter, ensure that the lazy bag is properly managed and closed when the sail is stowed.

Snow collecting inside the lazy bag may freeze into ice as temperatures change. Ice accumulation can prevent the mainsail from being raised or handled correctly.

Inspect the sail and lazy bag for snow and ice before attempting to hoist the mainsail.

Never force frozen sail-handling equipment. Monitor weather and icing conditions continuously.

10. Fishing – Equipment, Propellers and Cleaning

Fishing equipment must be used carefully to prevent damage to the vessel, guests and propulsion equipment.

  • Never allow fishing lines to enter the propeller area.
  • Keep fishing hooks away from the hull and windows.
  • Do not throw fishing hooks against or away from the vessel.
  • Lower fishing equipment vertically into the water.
  • After reaching the bottom, raise the equipment approximately one metre and work the line vertically.
  • Use appropriate landing equipment to bring fish safely onboard.
  • Clean fish blood and remains from the deck immediately.
  • Secure hooks, knives and fishing equipment when not in use.

The original Lagoon guide specifies a charge of EUR 15 for each lost fishing hook, payable on return.

Confirm whether this charge remains applicable to Arctic Charm and the current charter agreement.

Fishing activities must stop whenever they interfere with safe navigation, manoeuvring or guest safety.

11. Dinghy, Outboard Motor and Shore Transfers

Inspect the dinghy, outboard motor, fuel supply, securing arrangements, kill switch and safety equipment before use.

Important – Dinghy Drain Plug

Before launching the dinghy, ensure that the bottom drain plug is correctly installed and secured to prevent seawater entering the dinghy.

Check that sufficient fuel is available before operating the outboard motor.

Verify loading limits, weather conditions, safe boarding procedures and suitable landing locations.

The skipper decides whether dinghy operations and guest transfers may proceed. All occupants must use appropriate personal flotation equipment.

Record any defects and arrange repairs or suitable alternatives where possible.

12. Anchoring, Mooring, Fenders and Shore Access

Inspect the anchor, windlass, chain or rode, mooring lines, fenders and relevant deck equipment.

Assess water depth, holding ground, wind, tidal conditions and available swinging room.

Mooring Alongside Vertical Quay Posts

ACIN's original Lagoon guide instructs the crew to place a wooden plank outside the fenders when mooring against vertical quay posts.

The original guide states that this plank is stored on the starboard side of the vessel.

Arctic Charm: Confirm whether a suitable protective plank is carried onboard and where it is stored.

Use appropriate fender boards when necessary to protect the hull from quay structures.

Arrange safe access to the quay before docking whenever possible.

Confirm harbour fees and other charges and settle them before departure as required.

Respect private property, local harbour regulations and restricted access areas.

13. Arctic and Winter Operations

Monitor weather forecasts, sea state, visibility, daylight, air temperature, wind and icing risk throughout the voyage.

Routes and activities may need to be changed, postponed or cancelled for safety reasons.

Do not navigate into unsafe or ice-covered waters.

For Ski & Sail operations, the skipper is responsible for maritime safety, while the ski guide is responsible for mountain activity decisions within their professional competence.

The skipper and ski guide should coordinate weather windows, landing locations, return times, communication procedures and emergency alternatives daily.

No guest itinerary or activity commitment overrides the skipper's authority concerning maritime safety.

14. Provisions, Galley, Food Shopping and Life Aboard

Provisioning arrangements depend on the individual charter agreement.

Where ACIN supplies provisions without a chef, the food and drinks are delivered to the vessel and organised onboard by the skipper and crew together with the relevant group representatives.

Everyone should be shown what has been supplied and where food and drinks are stored.

The skipper is not engaged as a cook. Unless separately agreed, guests are responsible for preparing their own meals, sharing galley duties, cleaning up and managing provisions throughout the charter.

The skipper remains responsible for safe vessel operations, not meal service.

Explain galley equipment, gas and electrical safety, refrigeration, food storage, waste handling and water conservation.

Buy Food and Drinks Before Departure

We recommend purchasing your food, drinks and personal supplies before the trip starts.

Several grocery stores and shopping facilities are located in central Tromsø.

If ACIN has agreed to provide provisions, check the agreed supply arrangements before purchasing additional food.

For bareboat charters without included provisions, guests are responsible for purchasing their own food and drinks.

Grocery Stores and Shopping

Alcohol – Norwegian Regulations

In Norway, wine, spirits and alcoholic beverages above 4.7% alcohol by volume are normally sold through Vinmonopolet.

A Vinmonopolet store is located at Nerstranda Shopping Centre in central Tromsø.

Vinmonopolet – Store Information and Opening Hours

Beer up to 4.7% alcohol by volume can normally be purchased in grocery stores during permitted sales hours.

The original guide lists Vinmonopolet opening hours of 10:00–18:00 on weekdays and 10:00–15:00 on Saturdays.

It also states that grocery-store beer sales end at 18:00. These are historical opening and sales hours and must be checked before shopping.

Alcohol consumption must never compromise safe vessel operation or the safety of guests and crew. The skipper retains final authority over onboard safety.

15. Daily Briefings, Defects, Accidents and Incident Reporting

The skipper and ski guide should coordinate daily on weather, vessel movements, landing possibilities, mountain conditions, guest capability, emergency arrangements and alternative plans.

Guests should receive a clear briefing about the day's plan and possible changes.

All accidents, injuries, significant technical defects, near misses and relevant incidents must be recorded.

Document what happened, when and where it happened, persons involved, immediate actions taken and any necessary follow-up.

Notify ACIN promptly if technical assistance, replacement equipment, medical assistance or an alternative vessel may be required.

ACIN Contact Persons

Kurt Arild Larsen
Telephone: +47 905 49 997

Per Ståle Larsen
Telephone: +47 918 00 501

These contact details are from the original ACIN Lagoon guide and should be verified as part of document maintenance.

16. Emergency Procedures, First Aid and Rescue Contacts

In an emergency, protect life first, alert the appropriate rescue services and follow the vessel's emergency procedures.

First-Aid Equipment

The original Lagoon guide states that the first-aid kit is located in a drawer in the saloon.

Verify and record the actual location of Arctic Charm's first-aid kit and explain it during the safety briefing.

Emergency Contact Numbers – Norway

VHF Distress and Calling: Channel 16

Fire Department: 110

Police: 112

Ambulance: 113

Maritime Radio / Coastal Radio: 120

Joint Rescue Coordination Centre – Southern Norway: +47 51 51 70 00

Joint Rescue Coordination Centre – Northern Norway: +47 75 55 90 00

Information to Provide During an Emergency Call

  • Who you are and the vessel's name
  • Your exact position or best available location
  • What has happened and the nature of the emergency
  • How many people are onboard
  • Whether anyone is injured or missing
  • Vessel name and call sign: Arctic Charm, LH4395
  • MMSI: 258012150
  • What assistance is required

Follow instructions from rescue authorities. Use the installed distress communication equipment as appropriate to the emergency.

17. Technical Handover and Acknowledgement

Before charter departure, the technical responsible person completes the vessel-specific inspection.

The skipper reviews the technical inspection report, confirms disclosed deviations and completes an independent operational check.

Known defects, operating restrictions, outstanding maintenance and agreed corrective actions must be recorded clearly.

ACIN's planned digital handover process will record the booking reference, vessel, guide version, technical findings, signatures and timestamps.

The final signed PDF and a link to the retained original are intended to be stored with the relevant booking.

The skipper's acknowledgement should identify the versions of the mandatory operational documents reviewed before departure.

Until the digital process is implemented, the applicable existing ACIN handover and documentation procedures must be followed.

Pre-Departure Quick Reference

  • Read this Arctic Charm guide and mandatory operational documents
  • Check the correct Lagoon 40 owner's manual
  • Review technical inspection and known deviations
  • Verify vessel certificates and approved persons onboard
  • Check life jackets, fire extinguishers, alarms and first-aid kit
  • Verify navigation instruments, VHF, AIS and chart coverage
  • Locate electrical switches, fuses, water pumps and valves
  • Verify inverter operation and electrical load limitations
  • Confirm diesel heating configuration and safe operation
  • Check freshwater system, bilges and pumps
  • Inspect both engines, saildrives and propulsion systems
  • Inspect sails, rigging and lazy bag for snow or ice
  • Secure fishing equipment and keep lines clear of propellers
  • Check dinghy drain plug, fuel and outboard motor
  • Confirm fenders, mooring equipment and quay access arrangements
  • Review provisions and purchase any additional food or drinks
  • Confirm ACIN contact persons and emergency procedures
  • Coordinate itinerary and Plan B with the ski guide
  • Conduct guest safety briefing
  • Complete and acknowledge the vessel handover

All equipment locations and procedures transferred from the original Lagoon 450F guide must be verified for Arctic Charm before operational use.

Document: User Guide AC – Arctic Charm (Lagoon 40).
Status: Working version – vessel-specific technical verification required.
This document must be reviewed whenever equipment, procedures, safety requirements or vessel information change. The actual onboard configuration and applicable manufacturer's instructions take precedence over outdated descriptions.

Arctic Cruise in Norway AS (ACIN)

Tromsø, Norway

www.acinorway.com