Vessel-specific operating guidance, technical information, safety procedures and practical instructions for the skipper and crew of Arctic Princess.
Vessel: Arctic Princess (AP) · Lagoon 450F · Tromsø, Norway
Vessel: Arctic Princess
Model: Lagoon 450F
Call sign: LI6284
MMSI: 258157940
Design category: A
Recorded operating area: 4 – verify current approval
Recorded passenger figure: 12 – verify approved total persons onboard
Length: 13.96 m
Beam: 7.84 m
Draft: 1.31 m
Mast height: 23.77 m
Displacement: 14,500 kg
Freshwater capacity: 1,000 litres
Diesel capacity: 1,000 litres
Propellers: Folding propellers
Propeller supplier: JH Motor AS, Tromsø
Vessel particulars are based on ACIN's recorded information. Verify current certificates, approved operating limits, maximum persons onboard and actual vessel condition.
Review the following vessel records together with the current certificates and approved operational limitations:
These images are linked from the vessel record. Their contents must be reviewed and confirmed before being treated as current operating approvals.
This guide is a practical vessel reference, not a replacement for the manufacturer's manuals, statutory requirements, the onboard safety plan or the skipper's own professional judgement and pre-departure checks.
The skipper is responsible for verifying the condition of the vessel, equipment, safety systems and operational readiness before departure.
Report discrepancies to ACIN before departure. Safety-critical defects must be resolved before the affected operation proceeds.
The skipper must review the applicable operational and safety documents before departure. The ski guide must also review the documents relevant to their responsibilities.
The signed charter agreement, vessel documentation, onboard safety procedures and applicable legal requirements take precedence where relevant.
Review the charter itinerary, expected weather, planned sailing area, guest and crew details, technical inspection report and all known vessel deviations before departure.
The skipper must complete an independent inspection and confirm that Arctic Princess is suitable for the intended voyage.
The Lagoon 450 owner's manual should be available onboard and consulted for vessel-specific equipment, operating procedures and limitations. Confirm that the edition applies to Arctic Princess.
Lagoon 450 Owner's Manual – Original Reference
The original Lagoon guide also refers to a German-language manual stored in a suitcase beneath the captain's position in the saloon. Confirm its availability onboard.
Conduct a passenger safety briefing covering life jackets, emergency equipment, man-overboard procedures, fire response, evacuation, communications and crew responsibilities.
Locate and inspect all required safety equipment, including life jackets, life raft, first-aid kit, fire extinguishers, fire blankets, distress equipment and emergency communications.
Life jackets: Life jackets must be worn when moving on deck in accordance with the skipper's safety instructions. The skipper is responsible for enforcing this rule.
Check that sufficient correctly sized life jackets are available for everyone onboard.
The original Lagoon instructions identify fire extinguishers beneath the captain's table in the saloon, on the cockpit bench and automatic extinguishers in each engine compartment.
Fire blankets are described as being located in each cabin and near the galley.
Confirm all actual equipment locations, accessibility and applicable inspection dates.
Test each fire alarm before departure using its approved test procedure.
Explain the locations of safety equipment and muster arrangements during the guest briefing.
Before departure, check chartplotters, compass, depth instruments, navigation lights, autopilot, VHF, AIS and other installed navigation equipment.
The skipper must ensure that the vessel carries suitable, up-to-date navigational information and the charts required for the intended sailing area.
ACIN's original Lagoon guide requires paper charts for the planned voyage and checks against Norwegian Notices to Mariners (EFS).
Official chart overview: Norwegian Mapping Authority – Nautical Charts
Notices to Mariners: Kartverket – EFS
The original Lagoon guide lists the following paper chart numbers: 83, 84, 86, 87, 88, 89, 91, 92, 93 and 94.
Verify the current chart inventory, chart coverage and corrections for the planned route.
Updated electronic charts on a separate device, for example Navionics, may provide useful navigational redundancy.
Norli Bokhuset
Storgata 86, Tromsø
Telephone: +47 77 68 30 36
Email: bokhuset.tromso@norli.no
The original Lagoon 450F instructions state that the AIS system only operates when the master screen is set to the saloon.
Verify the actual AIS configuration and confirm normal reception and transmission where applicable.
AIS is an aid to navigation and does not replace a proper lookout, radar where fitted, or collision avoidance procedures.
Familiarise yourself with the vessel's electrical distribution, battery banks, shore-power connections, inverter, circuit breakers, switches and monitoring equipment.
The original Lagoon guide identifies:
Confirm these locations during technical handover.
The original guide describes an inverter reset using the main fuse beneath the bed in the starboard aft cabin.
This operation may also interrupt power to navigation instruments.
The original instructions therefore require a person to remain at the steering position on the flybridge during the reset.
Verify the correct reset procedure and affected circuits before operating the main fuse. Do not interrupt essential navigation or safety equipment while underway without maintaining safe vessel control and appropriate alternative systems.
Before assuming that the inverter has failed, check whether the microwave oven operates normally.
The original Lagoon guide describes a 16A shore-power supply with an approximate maximum load of 3.6 kW.
Verify the actual available electrical capacity before operating high-consumption equipment.
Avoid operating the microwave oven and coffee machine simultaneously on the inverter.
Electric fan heaters should not be used unless the available supply and circuit ratings safely support their operation.
The original guide recommends switching off the inverter before going to bed to prevent unnecessary battery discharge.
Confirm that shutting down the inverter will not disable required safety, alarm or monitoring equipment.
Arctic Princess has a generator covered by the vessel's technical operating procedures.
Before starting, review the installed generator's operating instructions and check fuel supply, relevant fluids, ventilation, visible leaks and abnormal conditions.
Start and stop the generator using its designated controls.
Follow the manufacturer's warm-up, electrical loading and shutdown instructions.
Monitor alarms, exhaust discharge, abnormal noise and temperature.
Stop and investigate any unsafe condition. Never operate the generator where exhaust gases could enter accommodation spaces.
Confirm the generator's exact model, controls and service requirements during technical handover.
Arctic Princess has diesel heating controlled by separate, portable start/stop controllers.
The main heater controller is located in each engine compartment, towards the seaward/outboard side of the hull.
The original Lagoon guide describes two Eberspächer 5 kW diesel heaters using a water-based heating system.
Blue coolant reservoirs are described as being located in the engine compartments.
The original instructions mention that coolant may need topping up approximately every second day.
This interval is not a substitute for checking the actual coolant level and investigating abnormal loss.
Never open a hot or pressurised coolant system. Use only the correct approved coolant.
The original Lagoon guide describes an additional 5 kW Webasto cockpit heater.
It also describes a defroster using hot water from the starboard engine.
Verify the current configuration and operating controls before use.
Exhaust components can become extremely hot. Never touch an exhaust pipe to confirm operation. Use safe, non-contact observation or an appropriate temperature measuring device. Ensure adequate ventilation and functional carbon monoxide protection where required.
Arctic Princess has a recorded freshwater capacity of 1,000 litres.
Before departure, verify water tank levels, pump operation, pressure, valves, visible pipework and relevant bilge compartments.
A freshwater leak on the starboard side remains recorded as present.
The skipper must be informed during handover and verify the current condition, affected system, operating restrictions and appropriate monitoring procedure.
Monitor freshwater consumption and bilge areas as relevant. If the leak worsens, affects essential equipment or cannot be managed safely, stop the affected operation and contact ACIN.
The original Lagoon guide instructs that the freshwater pump should be switched off overnight because of the known leak.
Confirm the current pump shutdown and restart procedure during handover.
The signed technical handover report must describe the current status of the leak and any restrictions.
Explain water conservation to guests. Investigate unexpected pump cycling, unexplained water loss or abnormal bilge accumulation.
Identify the toilet controls, holding tanks, relevant valves and discharge arrangements fitted onboard.
Demonstrate correct toilet operation to guests before departure.
Only approved toilet paper and human waste may enter the system.
Wipes, sanitary products and other objects must never be flushed.
Check that toilets flush correctly and that no abnormal leaks, alarms or blockages are present.
Follow local discharge restrictions. Report defects promptly and explain any operating restrictions to crew and guests.
Locate all bilge inspection points, pump controls, automatic bilge pumps and alarms.
Check for unexpected water accumulation and verify that relevant pumps and alarms operate correctly.
Investigate the source of any abnormal water ingress.
Never assume that bilge water is related to the known freshwater leak without checking.
Safety-critical water ingress must be addressed immediately.
Before departure, inspect both engine compartments for abnormal conditions, visible leaks, loose connections and other defects.
Check relevant fluid levels, cooling-water discharge, engine controls, steering response and propulsion alarms according to the manufacturer's instructions.
Familiarise yourself with the installed saildrives, folding propellers and their operating limitations.
The vessel record identifies folding propellers supplied by JH Motor AS, Tromsø.
Do not operate machinery with unresolved critical alarms, overheating, abnormal vibration or suspected damage.
Keep ropes, fishing lines and other loose equipment clear of the propellers.
Inspect the rigging, sails, sheets, halyards, winches and associated deck equipment before sailing.
When using the mainsail in winter, ensure that the lazy bag is properly managed and closed when the sail is stowed.
Snow collecting inside the lazy bag may freeze into ice as temperatures change.
Ice accumulation can prevent the mainsail from being raised or handled correctly.
Inspect the sail and lazy bag for snow and ice before attempting to hoist the mainsail.
Never force frozen sail-handling equipment. Monitor weather and icing conditions continuously.
Fishing equipment must be used carefully to prevent damage to the vessel, guests and propulsion equipment.
The original Lagoon guide specifies a charge of EUR 15 for each lost fishing hook, payable on return.
Confirm whether this charge remains applicable under the current charter agreement.
Fishing activities must stop whenever they interfere with safe navigation, manoeuvring or guest safety.
Inspect the dinghy, outboard motor, fuel supply, securing arrangements, kill switch and safety equipment before use.
Before launching the dinghy, ensure that the bottom drain plug is correctly installed and secured to prevent seawater entering the dinghy.
Check that sufficient fuel is available before operating the outboard motor.
Verify loading limits, weather conditions, safe boarding procedures and suitable landing locations.
The skipper decides whether dinghy operations and guest transfers may proceed. All occupants must use appropriate personal flotation equipment.
Record any defects and arrange repairs or suitable alternatives where possible.
Inspect the anchor, windlass, chain or rode, mooring lines, fenders and relevant deck equipment.
Assess water depth, holding ground, wind, tidal conditions and available swinging room.
ACIN's original Lagoon guide instructs the crew to place a wooden plank outside the fenders when mooring against vertical quay posts.
The original guide states that this plank is stored on the starboard side of the vessel.
Confirm that a suitable protective plank is carried onboard and where it is stored.
Use appropriate fender boards when necessary to protect the hull from quay structures.
Arrange safe access to the quay before docking whenever possible.
Confirm harbour fees and other charges and settle them before departure as required.
Respect private property, local harbour regulations and restricted access areas.
Monitor weather forecasts, sea state, visibility, daylight, air temperature, wind and icing risk throughout the voyage.
Routes and activities may need to be changed, postponed or cancelled for safety reasons.
Do not navigate into unsafe or ice-covered waters.
For Ski & Sail operations, the skipper is responsible for maritime safety, while the ski guide is responsible for mountain activity decisions within their professional competence.
The skipper and ski guide should coordinate weather windows, landing locations, return times, communication procedures and emergency alternatives daily.
No guest itinerary or activity commitment overrides the skipper's authority concerning maritime safety.
Provisioning arrangements depend on the individual charter agreement.
Where ACIN supplies provisions without a chef, the food and drinks are delivered to the vessel and organised onboard by the skipper and crew together with the relevant group representatives.
Everyone should be shown what has been supplied and where food and drinks are stored.
The skipper is not engaged as a cook. Unless separately agreed, guests are responsible for preparing their own meals, sharing galley duties, cleaning up and managing provisions throughout the charter.
The skipper remains responsible for safe vessel operations, not meal service.
Explain galley equipment, gas and electrical safety, refrigeration, food storage, waste handling and water conservation.
We recommend purchasing your food, drinks and personal supplies before the trip starts.
Several grocery stores and shopping facilities are located in central Tromsø.
If ACIN has agreed to provide provisions, check the agreed supply arrangements before purchasing additional food.
For bareboat charters without included provisions, guests are responsible for purchasing their own food and drinks.
In Norway, wine, spirits and alcoholic beverages above 4.7% alcohol by volume are normally sold through Vinmonopolet.
A Vinmonopolet store is located at Nerstranda Shopping Centre in central Tromsø.
Vinmonopolet – Store Information and Opening Hours
Beer up to 4.7% alcohol by volume can normally be purchased in grocery stores during permitted sales hours.
The original guide lists Vinmonopolet opening hours of 10:00–18:00 on weekdays and 10:00–15:00 on Saturdays.
These are historical opening hours. Check current store hours and local alcohol sales restrictions.
Alcohol consumption must never compromise safe vessel operation or the safety of guests and crew. The skipper retains final authority over onboard safety.
The skipper and ski guide should coordinate daily on weather, vessel movements, landing possibilities, mountain conditions, guest capability, emergency arrangements and alternative plans.
Guests should receive a clear briefing about the day's plan and possible changes.
All accidents, injuries, significant technical defects, near misses and relevant incidents must be recorded.
Document what happened, when and where it happened, persons involved, immediate actions taken and necessary follow-up.
Notify ACIN promptly if technical assistance, replacement equipment, medical assistance or an alternative vessel may be required.
Kurt Arild Larsen
Telephone:
+47 905 49 997
Per Ståle Larsen
Telephone:
+47 918 00 501
The original Lagoon guide states that the first-aid kit is located in a drawer in the saloon.
Verify its current location and explain it during the safety briefing.
VHF Distress and Calling: Channel 16
Fire Department: 110
Police: 112
Ambulance: 113
Maritime Radio / Coastal Radio: 120
Joint Rescue Coordination Centre – Southern Norway: +47 51 51 70 00
Joint Rescue Coordination Centre – Northern Norway: +47 75 55 90 00
Follow instructions from rescue authorities. Use the installed distress communication equipment as appropriate to the emergency.
Before charter departure, the technical responsible person completes the vessel-specific inspection.
The skipper reviews the technical inspection report, confirms disclosed deviations and completes an independent operational check.
Known defects, operating restrictions, outstanding maintenance and agreed corrective actions must be recorded clearly.
ACIN's planned digital handover process will record the booking reference, vessel, guide version, technical findings, signatures and timestamps.
The final signed PDF and a link to the retained original are intended to be stored with the relevant booking.
The skipper's acknowledgement should identify the versions of the mandatory operational documents reviewed before departure.
Until the digital process is implemented, existing ACIN handover and documentation procedures must be followed.
Document:
User Guide AP – Arctic Princess (Lagoon 450F).
Status:
Working version – technical details and current operating
limitations to be verified during vessel handover.
This document must be reviewed whenever equipment,
procedures, safety requirements or vessel information change.
The actual onboard configuration and applicable manufacturer's
instructions take precedence over outdated descriptions.